Go to Ocam's Menu-Options and click Reset button to reset all settings of Ocam.
Alternatively, after exiting ocam, go to the %appdata%\ocam folder through Windows Explorer and delete the Config.ini file.
However, if you directly delete the Config.ini file, serial information may be deleted as well, so this method is not recommended unless it is inevitable.
Statistics Elements
About
This is a blog to share a variety of tips and news associated with OhSoft.
[Tips]How to record the microphone and computer sound together during recording (Windows Vista, 7, 8, 10)
Click the Sound button in the Ocam main window.
The following menu pops up and it is checked by default that no microphone is recorded.
Select the microphone you want to record. (If the microphone does not appear in the list, see below.)
If checked, the settings are applied as follows and the microphone is recorded together.
If the microphone device is not listed above even though the microphone is connected, proceed as follows.
(If the menu related to the microphone does not appear at all and the system sound recording menu only appears, or the microphone item appears but all microphone devices are not displayed, the audio is not the default microphone device. The interface unit should be listed and follow this procedure if it does not.)
Go to Start Menu-Control Panel. Find and click the Sounds item in Control Panel.
The following window will appear. Click the Recording tab.
If you go to the Recording tab, no audio device is set. Click the right button on the white background to open the popup menu. (Or the recording device appears in the list but the desired device does not appear)
Click Show Unavailable Devices.
Select the microphone device you want to use and press the right button to click Enable. (If you are using an audio interface, you may have a separate recording device called a line input in addition to the microphone, and you must record with that device.)
Click the Sound button on the OHCAM to check if the microphone unit is working properly.