Blog

Got a Blue Screen? How to Read the Stop Code and What to Try First (Windows 10 and 11)

A monitor showing a blue error screen next to a checklist card, with a worried duck holding a magnifier

When the screen suddenly turns blue (black on the newest Windows 11) and the PC restarts, that's what people call a blue screen. It looks scary, but the one-line stop code on the screen narrows down the cause a lot.

Step 1: Find the stop code

  • Near the bottom of the error screen there is a Stop code in capital letters, such as MEMORY_MANAGEMENT or IRQL_NOT_LESS_OR_EQUAL. Take a photo of it with your phone.
  • If the screen disappears too fast, press Win + R → sysdm.cpl → Advanced → Startup and Recovery Settings and untick Automatically restart. Next time the screen will stay.
  • If it has already gone, open Event Viewer with Win + R → eventvwr, go to Windows Logs → System and look for a "BugCheck" entry. The code is recorded there.

Step 2: Common codes and where to look first

  • MEMORY_MANAGEMENT, PAGE_FAULT_IN_NONPAGED_AREA: likely a memory (RAM) problem. Run the memory test below first.
  • IRQL_NOT_LESS_OR_EQUAL, DRIVER_IRQL_NOT_LESS_OR_EQUAL, SYSTEM_SERVICE_EXCEPTION: usually a driver. Suspect whatever device, driver or program you installed most recently.
  • VIDEO_TDR_FAILURE: a graphics driver problem. Reinstall the driver from the NVIDIA, AMD or Intel website.
  • CRITICAL_PROCESS_DIED: core Windows files may be damaged. Run the system file check below.
  • INACCESSIBLE_BOOT_DEVICE: Windows can't read the boot drive. Check the SSD's connection and health.
  • WHEA_UNCORRECTABLE_ERROR: a hardware error. If you overclocked, go back to default settings and check for overheating.

Step 3: Four checks anyone can do

  • Undo recent changes: if you installed an update, driver or program just before the blue screens began, remove it or go back to a system restore point.
  • System file check: right-click Start → Terminal (Admin), run sfc /scannow, then run DISM /Online /Cleanup-Image /RestoreHealth.
  • Memory test: press Win + R → mdsched and choose "Restart now and check for problems". If it finds errors, reseat the RAM or test one stick at a time.
  • Disk check: in an admin terminal run chkdsk C: /scan, and check your SSD's health too.

If Windows won't even start

  • Turn the PC on and, when the Windows logo appears, hold the power button to switch it off. After two or three times the Automatic Repair screen appears.
  • Go to Advanced options → Startup Settings → Safe Mode to remove a recent driver, or choose System Restore.
  • If you have important files, back them up to an external drive or the cloud before you start fixing things.

Reference: Microsoft Support – Resolving blue screen errors in Windows

Blog

← Back to the list Back to top ↑